Ironmaster Super Bench PRO V2 vs REP BlackWing

Ironmaster Super Bench PRO V2 versus REP BlackWing is a spec comparison, not a test. Modular Super Bench versus BlackWing. Every number below is copied from a manufacturer page or official sheet and carries an as-of date of 2026-10-14 on the product records. If a field is blank on the maker’s page, it stays blank here.

Ironmaster describes the Ironmaster Super Bench PRO V2 as: The Super Bench PRO V2 is a 1,000 lb-flat / 600 lb-incline bench with 11 lock-out angles from 0 to 85 degrees, a 17.2-inch flat height, and a 65–69 lb listed weight. Ironmaster lists 11 lock-out angles (0, 5, 10, 20, 30, 40, 50, 60, 70, 80, 85 degrees) and capacities of 1,000 lb flat and 600 lb incline/upright. Flat height is 17.2 inches, overall length is 47 inches, the longer foot is 21 inches wide, and the main pad is 44 by 10.25/12.25 by 2.5 inches. Bench weight is 65 lb without the incline seat and 69 lb with it.

REP describes the REP BlackWing as: The BlackWing is REP’s 1,000 lb ZeroGap FID bench with 12 back angles from -8 to 85 degrees, a 17.2-inch height, and a listed 131 lb weight. REP states 12 back pad angles (-8, 0, 10, 20, 30, 37.5, 45, 52.5, 60, 67.5, 75, 85) and 6 seat angles on an 11-gauge frame rated 1,000 lb. Official dimensions are 131 lb, 59.5-inch length, 25.8-inch width, 17.2-inch height, and a 12.2-inch standard pad (14 inches wide). The product page describes it as a flat-incline-decline bench with ZeroGap and 3.1 sq ft upright storage.

On listed height, Ironmaster Super Bench PRO V2 is 17.2 in and REP BlackWing is 17.2 in. Width is 21 in versus 25.8 in. Depth / length is 47 in versus 59.5 in (falling back to a listed length where a maker omits depth). Unit weight is 69 lb versus 131 lb. Listed load or user capacity is 1000 lb versus 1000 lb.

Pad / bench height is 17.2 in versus 17.2 in. Pad width is 12.25 in versus 12.2 in. Back-pad range is 0° to 85° versus -8° to 85°. Decline is true versus true. Warranty text is “not published” versus “10”.

FitScout spec scores — our weighted rubric, not Amazon stars — are 62 for Ironmaster Super Bench PRO V2 and 68 for REP BlackWing. Missing fields do not count as zeros; they drop out of the average. The rubric for benches is published on the methodology page.

We do not print manufacturer list prices or Amazon prices on this page. Use Check price on each card for the current offer.

Who the Ironmaster Super Bench PRO V2 is for, in our reading of the spec sheet: Lifters who want an attachment-ready 11-angle bench with a 17.2-inch competition-standard flat height and a removable incline seat. Skip it when Buyers who want a conventional ladder FID with a wide fixed seat; the incline seat is a separate 9.5-inch pad that plugs in from the side.

Who the REP BlackWing is for: Lifters who want ZeroGap, built-in -8-degree decline, 72 published angle combinations, and 3.1 sq ft vertical storage. Skip it when Buyers who want a lighter bench; REP lists the BlackWing at 131 lb, heavier than the AB-3000 2.0 and AB-5200 2.0.

If ceiling height is the constraint, prefer the shorter published frame and then run Will-It-Fit with your ceiling, your height, and the exercise. HAJEX’s standing-press rule of thumb is height × 1.33 plus about 9 in for full-size plates. A rack that “fits the room” on assembled height can still fail a pull-up if there is not about a foot above the bar.

This page does not say either product was used, assembled, or worn-in by FitScout. Sources are the manufacturer URLs on each spec row. If a maker updates a dimension after 2026-10-14, the as-of date is the tell.

647 words. Spec-based analysis, not a test report.